The guardrail panel forming machine is an important equipment for the mass production of guardrail panels on highways, featuring high automation and high forming accuracy. However, during daily operation and maintenance, strict adherence to regulations is necessary to ensure the safe and stable operation of the equipment. The following are the main precautions:

1. Pre-start inspection
Check that the motor, switch, circuit and grounding are normal and secure;
Confirm that the operation buttons and components are in the correct position;
Check the alignment and firmness of the upper and lower molds, and whether the positioning device meets the processing requirements;
Turn on the power, start the oil pump, and run without load for 5-10 minutes to ensure there are no abnormal sounds or issues.

2. Precautions during operation
During the operation, one person should be in overall charge, and the feeding and pressing personnel should cooperate closely to ensure safety of their positions;
If any abnormal noise or malfunction is detected during the equipment operation, the machine should be stopped immediately for inspection. The problem should be resolved before resuming production;
During the processing, strictly follow the operating procedures. The operators must wear protective equipment.

3. Lubrication and Maintenance
Regularly check for any leaks in the oil circuit to prevent piston rod scratches and deterioration of the oil;
Ensure that all grease connections are unobstructed and replenish the grease in time;
Replace the hydraulic oil once a year and clean the oil sludge in the oil tank to maintain stable oil quality;
Regularly clean the water cooler to prevent overheating of the oil and aging.

4. Safety Protection
Regularly check whether the safety door switch, oil pressure relief valve, mechanical safety stop device and warning lights are functioning properly;
During operation, ensure that all safety devices are in an effective state to prevent accidental operation or equipment damage.

Conclusion
The forming machine for guardrail panels not only enhances production efficiency but also imposes stricter requirements on operational safety and equipment maintenance. Only by strictly following the operating procedures and conducting regular maintenance can the equipment maintain its optimal condition and continuously provide a stable guarantee for the production of road guardrail panels.